Has anyone remade their LIM/UIMs with stainless or nickle plated bronze One touch fittings with some high temp teflon (PTFE) lines>?

 

What exactly are you talking about? Might need some pics or examples.

Short answer, I don't think so.

Are you talking about quick connect/disconnects for vacuum lines and stuff?

Dale

 

Something like this.

 

Kinda cool, but IMHO that's a lot of effort for no return. It's not like silicone hoses are hard to remove or don't seal well or something.

Dale

 

Great fittings. I've used them before but not on my FD. I've seen a few people who have used these fittings on their FDs.

 

Havent used them before but they look neat. Synapse seems to use it for everything it seems.

http://synapseengineering.pinnacleca...nnect-5-1.html

 

Unfortunately so.

In my foolishness many years ago I bought the Synapse wastegate and BOV and now am trying to tidy everything up, they use alot of hoses.

The effort we don't have to worry about I already had spare manifolds that I am working on the side with. Just was curious if anyone had any leads or tips as I don't know if success has been had with PTFE interior clips vs the standard plastic ones that I am sure would melt in a few miles.