Resource

BI State Customs are rebuilding twin turbos now for $700. You just send them yours and they will rebuild them and send them back to you. Turnaround is 3 days from when they receive them. They can also upgrade your twins to flow up to 420rwhp.

Here is their address and phone number:

Thought this might help out some of you.

BI State Customs
4501 North Belt West
Belleville Illinois

618-234-0069

vudoodoodoo

Not a bad deal.

Railgun

Any testamonies (sp?) to these guys? How much for an upgraded rebuild?

Resource

You're better off calling their shop for prices and ask for Ron.

618-234-0069

Meiogirl on the forum got her turbos rebuilt there so you can PM her.

Meiogirl

iTrader: (2)

I can vouch for Bi-State's work. I had mine done there right before Midwest Revolution (end of April). So when I got the car back it was taken out to Indy and took a beating on the drag and a couple times on the autocross. Thats probably the hardest I could hit ever work those turbos and they are hanging in beautifully.

editted to let you know I didn't get the upgrade, I just had mine rebuilt.

meddle

Eric, do you have any cores laying around? For purchase?

Resource

I might........ What's wrong with yours?

meddle

The secondary is just f-ed. It's almost seized. The primary looks great and has little play. They are still on th emotor, so I'm not sure if they are crakced or not. Just wondering if your have spare parts on hand if they are neccessary.

JOES95RX7

Do they high speed balance them?

jdhuegel1

Mine are at Bi-State as well. Along with my motor.

mp5

iTrader: (3)

Is their anyone that has gone to theese guys that can share their experiance? especially if you upgraded to 400 hp .

mp5

iTrader: (3)

Called this morning..no answer?

Resource

They're working on pricing for their upgraded units right now but I can vouch that the prices will be considerably less than other competitors.

3isacharm

does Bi State Customs have a web site??? I was going to send my turbos off to BNR for the Stage 2 or 3 rebuilt but if Bi State is cheaper then I might just change my mind!

3isacharm

also what kind of warranty comes with the turbo rebuild. I believe BNR has a 1 year warranty, this could be the deciding factor!

Resource

They're actually working on a website now so it will be up soon.

BI State Customs also offer a 1 year warranty.

Maxwell

Eric,
In the process of making 420hp, are the seals upgraded? Could you please provide more specifics as to what is being upgraded?

Thanks,
Max

Resource

Which seals are you refering to?

With the 400+ package you will get the standard rebuild plus the following.

-Heavy Duty Shaft Ring Seals
-Completely digitally Balanced
-Ported Wastegate
-Turbine Wheels Clipped
-Both of your primary and secondary compressor wheels are upgraded.
-Heavy Duty upgraded thrust bearings
-Both Cartridges are bead blasted and high temp coated

Note: This is not the $700 package, prices for this are soon to come and well worth it.

Hope this helps

artguy

can we please see a dyno sheet and mod list for one of your cars running those twin turbos?...even a customers car??

you see...right now SPOAUTOS on a set of BNR Stage 3's holds the 403rwhp mark...and they proved it with timesheets at the track where he trapped 126 mph in the quarter....can yours do that?

We would all appreciate it if you would do this................. Wouldnt we?...


j

I posted my m2 twin dyno sheets...spo posted his....Hurry up someone!! buy them and see if they can do it!! If you can break 410-415 corrected than you will earn some takers.

artguy

on another note....if you make a great turbo setup for the rx8 then that car becomes very attractive...long live the rotary! haha

Resource

We have a set ready to go. We just need to get them on a RX7. It isn't a matter of will they perform. It's a matter of when

Resource

The Turbo Kit for the RX-8 is in the making

ejmack1

You can ****** use my car to put the turbos on

t-von

iTrader: (8)

Any idea how much of a hp increase the turbo kit for the 8 will get?

artguy

well i look forward to seeing the dyno sheets for your sets.

thanks


j