i can not find any place that sells the mounting kit! AHHHHHHHH!!! i only have the blow off valve itself. nothing else. i think i have the correct flange, but i dont have the part that the bov connects to that gets welded. anyone know where i can find this?

-zac

 

hey,

i have that bov and the aluminum flange that gets welded onto it.. i can get it for you but any speed shop should have it.....

this is a pic of it on my car a while back:


is that what you want?

 

Depends on the mounting location. The Stock Location kit, I looked for it for weeks, and nobody seems to sell just the stock mounting flange... it only comes as a kit, the "Universal" flange comes in Iron, and Alluminium and can be welded to any suck part of the same "Type" of metal... the issue is none of the IC hoses, stock are metal... so you have to do what rzograbian did and get a greddy elbow, and Alluminium Pipe to go with it...

 

that is exactly what i need. i have asked 3 speed shops and they order it. what comes to me??? a little flange that has two screw holes in it and is about 1/8" thick! WTF !!!!!!! how does the bov mount to it? it looks like you would slide it in and turn it to lock it there. wierd i must say. hahaha oh and i will have aluminized steel for ic piping. so i dunno which mount i will need. man, you already have helped me so much. let me know what you can do

-zac

 

i just bought the alum. one. its expensive to werld though! also, putting the BOV on there is a nightmare!! you are suppose to have a C-clip with two holes on the end. also, a rubber gasket that looks like a rubber band. putting it in there took me and 3 other guy's 30 minutes! if you have the right tools, it doesnt take really long

 

www.takakaira.co.jp youll find it there good luck

 

HKS does not sell the FD kit by it self. You would have to buy a whole new kit or get an aluminum flange and weld it to an intercooler pipe.

Jason

 

The Generic Flange is sold here...

http://www.935motorsports.com/

 

is this it?

http://cgi.ebay.com/ebaymotors/ws/eB...sPageName=WD1V

 

i need a unviersal flange. i am making my own intercooler piping. thanks so far for all your help!

 

That's the steel version of what you need...

 

but that's it right? the gaskets and crap came with the bov thank god. hahahha

 

i have a brand new bov flange (aluminum) if u need one

let me kno

thanx
mike

 

its from hks

 

ok i'm an idiot when it comes to metals... but the shop that will be making my piping said it's "aluminized steel" so would i need a steel flange or aluminum flange?

-zac

 

i went aluminum wit mine

 

i mounted mine were the stock light relays are i had it were the instructions say but it got caked with oila nd dirt so i moved it

 

doesn't matter for ic piping doesnt get hot enought to make a difference. what ever is cheaper and easy to get

 

If you are going to put it on a mild steel IC pipe, you want a mild steel flange. Different types of metal don't like to be welded together.

 

im no expert but you cant weld steel to aluminum can you? thats really expensive on e-bay.. i got mine a lot cheaper! and it was new.... also, who said that hks doesnt sell the flange only? they do, what they dont sell is the STUPID LITTLE MUFFLER FOR THE INTAKE KIT that i need!!!

 

Mine was a aluminum piece I had it welded up and then polished looks great after polish

 

rock on! i think i got it now. just gotta find a place that has it for a good deal thanks!!!!!

-zac