dazed01

I pulled thethere omp nozzles out to replace them and there is a rubber grommet under them that came out with one of the nozzles. I don't remember seeing it on the parts guys computer screen when ordering the nozzles and can't find them in any manual. I'm assuming since they are there they are important but I can't find them anywhere else. I don't remember seeing any in rx8's but they have a different oil injector design also.

Rx7aholic

iTrader: (22)

That part usually comes with new rotor housing I am surprise it came out. It's a hard part to find.
Khris

dazed01

where would I go about finding one?

dazed01

I was a bit surprised when this rubber grommet came out with it also, it would have been nice if it came out still servicable.

Rx7aholic

iTrader: (22)

The dealer suppose to be able to get for u, since most dealer does not know allot about the Rx7 needs, I would suggest go with Ray from Malloy I sure u can find his info on the forum, if I can my little bag with the part number I will post it.
Khris

PandazRx-7

iTrader: (18)

Try this number -----> N3G1-14-634

dazed01

Thank you, I'll give that a shot today and overnight one.

dazed01

Thank you very much for the part number. How did you get it? Me and my parts guy looked at the parts system and couldn't find it and Mazda tech support couldn't get me the part number. I got it in this morning.

PandazRx-7

iTrader: (18)

Haha, I was in the same boat as you a couple years back and some dude posted that number in that thread. I was surprised too when it checked out and so was Ray at Malloy at the time...

j9fd3s

iTrader: (3)

if you didn't get the memo, there's no way to know...

dazed01

I really appreciate it, after replacing the fuel lines, vacuum lines, under manifold coolant lines, having the injectors serviced that little rubber grommet gave me the biggest problem. The car is running way better than before and appreciates it too.