Air temp sensor question
09-13-03, 02:11 PM
#1
Ee / Cpe
Thread Starter
Join Date: Jan 2003
Location: Gaithersburg, MD / WVU
Posts: 2,843
Likes: 0
Received 2 Likes
on
2 Posts
Air temp sensor question
my haltec is reading quite off on my air temp sensor....
it says about 80 degrees before i start the car on a 65 degree day, and on the highway it reads around 130-140 when the car is warmed up....
toughts/comments?
it says about 80 degrees before i start the car on a 65 degree day, and on the highway it reads around 130-140 when the car is warmed up....
toughts/comments?
09-16-03, 04:42 PM
#4
Ee / Cpe
Thread Starter
Join Date: Jan 2003
Location: Gaithersburg, MD / WVU
Posts: 2,843
Likes: 0
Received 2 Likes
on
2 Posts
stock ic... intake, dp, catback, stock midpipe... ive been doing alot of reading on the sensor... (seems im not the only person with this concern) i guess my main question now is, is the stock one good enuf? or should i upgrade (i plan to be single turbo soon) and which sensor should i upgrade to?
09-16-03, 05:04 PM
#5
https://www.rx7club.com/forum/showth...ing+air+sensor
https://www.rx7club.com/forum/showth...ing+air+sensor
i was a little weary about relocating mine into the elbow since im on a pettit ecu. If I could monitor the sensor then I would have done it while I had everything out. I really wanted when putting on the BOPs but then I figured nah leave it just in case.
https://www.rx7club.com/forum/showth...ing+air+sensor
i was a little weary about relocating mine into the elbow since im on a pettit ecu. If I could monitor the sensor then I would have done it while I had everything out. I really wanted when putting on the BOPs but then I figured nah leave it just in case.
Thread
Thread Starter
Forum
Replies
Last Post
immanuel__7
2nd Generation Specific (1986-1992)
89
09-05-15 10:23 AM
befarrer
Microtech
3
08-22-15 05:52 PM