ACT clutch installed last year
ACT clutch installed last year
sitting at a stop light in NYC and the pedal goes mussy and the car won't go into gear!
Any ideas, clutch has about 10k miles on it and I have been VERY gentle, no launches, no drag racing, a few road racing track days. I always match revs and rarely slip the clutch.
Any ideas, clutch has about 10k miles on it and I have been VERY gentle, no launches, no drag racing, a few road racing track days. I always match revs and rarely slip the clutch.
check your clutch hose. It's mounted on the firewall next to the map sensor. typically leaks at the crimped part due to thermal cycling. replace with a braided one from the rx7 store for about $40.00.
If it's the slave, you usually get plenty of warning such as sitting at a light in gear with clutch pedal depressed, the car starts moving forward.
If it's the slave, you usually get plenty of warning such as sitting at a light in gear with clutch pedal depressed, the car starts moving forward.
i had the same problem i replaced everything at once so i wouldent encounter the problem again at a later time. i replaced the clutch line with a stainless steel one and replaced the slave and mater cylinders. it cost me about 230 for parts and labor
Thread
Thread Starter
Forum
Replies
Last Post



