? about negative wire on battery
#1
Rotary Enthusiast
Thread Starter
iTrader: (2)
Join Date: Sep 2002
Location: FL
Posts: 924
Likes: 0
Received 0 Likes
on
0 Posts
? about negative wire on battery
My rx7 has been giving me a hard time starting (cold start and hot). I have a fairly new battery.and it seems that my negative cable on the battery is bad.It seems to be broken.If i wiggle it or bend it a certian way it starts right up.My question is how difficult is it to replace the whole negative wire. I don't have alot of tools,and i'm not sure how far back the negative battery cable goes.
#2
Z06 powered FD
Join Date: Mar 2001
Location: Dallas, Texas
Posts: 1,883
Likes: 0
Received 0 Likes
on
0 Posts
I think it goes down to the bottom of the housings. If that's the one I'm thiking about then it's fairly easly to replace. Measure it then go to the local parts store.
Add an extra one while you're at it to another place.
Oh yea, is it slow turning over or does it act like a dead battery?
Add an extra one while you're at it to another place.
Oh yea, is it slow turning over or does it act like a dead battery?
#3
I'm a CF and poop smith
go to your local parts store and find a new terminal, one which has a coupler type of attachment on it (so that you can just strip back the wire and it clamps down on it). you can also put more ground strips. then just cut the current neg battery terminal and replace it.
Good luck
Good luck
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM