Where can I find an undertray that will cover the entire bottom with a '99 bumper installed? My stock plastic doesn't reach all the way to the lip, leaving a huge gap. Or am I just missing a piece? Thanks

 

no the 99 spec and stock are almost exactly the same. It should reach.


here is a pic in this thread:
https://www.rx7club.com/forum/showth...ight=undertray

 

Get in touch with Jason from RX7store.net

I believe he has them for cheaper than mazdacomp.

My 93 didn't quite reach the bumper. but who knows.

 

Thanks, mine does not reach even close.

 

I would say that if your 93 doesn't reach, something is wrong. They are basically the same undertray only with the little subtray that mat with the opening of the 93 nose removed.

 

Is the stock 93 tray a 2 piece? Am I missing the smaller front part? Was it removed to fit a huge intercooler? I mean the tray I have looks normal, not cut, but is about 6 inches short of reaching the 99 lip, and I had to zip tie it to try to prevent air from bending the rest of the tray down. ??? I need to take a pic and post it.