99 spec front bumper and Greddy 3 row
#1
99 spec front bumper and Greddy 3 row
I installed my Greddy 3 row and my bumper isn't lining up correctly anymore. The bumper sits low on the passenger side and high on the driver side. When I say high and low I am referring to the way it matches up to the headlights.
Any thoughts or suggestions.
thanks..
Any thoughts or suggestions.
thanks..
#2
Rotary Enthusiast
Join Date: Dec 2003
Location: N/A
Posts: 1,109
Likes: 0
Received 0 Likes
on
0 Posts
The bumper is sitting lower because the intercooler is pushing it out. That's a really thick intercooler. I had to trim my stock bumper a lot when I installed mine.
Trim the inside of your bumper where it hits the intercooler, small pieces at a time. Use a jig saw. Don't worry, it cuts smooth.
Trim the inside of your bumper where it hits the intercooler, small pieces at a time. Use a jig saw. Don't worry, it cuts smooth.
Thread
Thread Starter
Forum
Replies
Last Post