what do i do to get the 99 spec oem front bumper to fit to a car with a 93 rebar and greddy 2 row front mount? thanks

eugene

 

Goodfella had some good pictures of how he did it a month or so back. If i recall correctly you have to cut the turn signal openings

 

just cut the oem rebar to fit the 99 turn signals and ur pretty much set.
other than transferring the metal bumper support.

 

I'm not sure about the front mount, but for the '99 spec bumper you just have to open up the turn signal holes in the stock rebar.

 

https://www.rx7club.com/forum/showthread.php?t=427656

 

I've been doing some research myself, and I'm curious about which support pieces need to be transfered. I don't have a donor stock bumper to refer to, just the pic below from the parts catalog. Is it just 50-0K0 (NO. 3)?

Thanks.

 

Bump. Anyone?

 

IIRC, you need to transfer over no 1 and no 2 in addition to no 3. They need to be pop-rivetted on.

 

Thank you sir.

 

No problem . It was a number of years ago, so I hope my memory is correct