99 spec buper addition: air guide
99 spec buper addition: air guide
https://www.rhdjapan.com/home/produc...roduct_id=3435
I don't know if this part already comes with the kits but I saw it and thought somebody out here might want it or it might actually be beneficial. Just read the part description on the right.
I don't know if this part already comes with the kits but I saw it and thought somebody out here might want it or it might actually be beneficial. Just read the part description on the right.
Good find! Those ARE NOT included in kits. Most kits only include:front bumper, rebar, combo lights, and lip. What they forget to mention for a full conversion, is the 99 undertray, air guide, and oil cooler ducts.
well here are some more great goodies that would complete the whole bumper that you can get from rhdjapan
https://www.rhdjapan.com/home/produc...roduct_id=3166
https://www.rhdjapan.com/home/produc...roduct_id=3163
https://www.rhdjapan.com/home/produc...roduct_id=3166
https://www.rhdjapan.com/home/produc...roduct_id=3163
Um, yeah, it is. The air guide basically seals up the large space between the '99 bumper and the bumper support. Otherwise, without it, you may have a nice looking bumper, but most of the air going into the radiator nacelle will just escape upward into the area in front of the bumper support.
Spend 30 seconds cutting off the bottom part and save yourself 60 bucks.
Last edited by afterburn27; Oct 7, 2007 at 02:21 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
ZaqAtaq
New Member RX-7 Technical
2
Sep 5, 2015 08:57 PM





