7 psi on secondary !!! HELP !!!
#1
Full Member
Thread Starter
Join Date: Nov 2001
Location: Aurora, Colorado
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
7 psi on secondary !!! HELP !!!
I just got my car yesterday. When I did a boost test today it ran a 10-8-7 boost pattern in 3rd gear. I have run a search but come up with nothing (search engine sucks). If anyone knows some common causes of this, please post.
#2
Rotary Enthusiast
Check for boost leak in the intake path. start from the y-pipe, examine the rubber couplings very carefully. Boost leak is the most common cause of pressure drops. Good luck
#3
Rotary Enthusiast
iTrader: (6)
Join Date: Aug 2001
Location: Cincinnati
Posts: 948
Likes: 0
Received 0 Likes
on
0 Posts
I would go one step further. Remove the y pipe and the rubber piece that attaches it. It is hard to see some of the leaks that are created there but if you remove the rubber sometimes the little cracks become evident. This did happen to me once, similar boost pattern. The problem was a small split in the rubber piece.
Chris
Chris
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM