3rd gen rollbar info
11-29-01, 07:42 PM
#1
Full Member
Thread Starter
Join Date: Feb 2001
Location: Austin, Texas, USA!
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
3rd gen rollbar info
Can anyone supply detailed technical information on how rollbars (Kirk Racing and especially M2) attatch to the chassis? I would consider building my own but I'm very reluctant to drill holes to mount it. Any and all pics and drawings would be appreciated.
Also, if anyone knows of any chassis builders in the Austin, Texas area, I would appreciate a contact. I have 304 stainless steel pipe in 1.5" and 2.0" available to me and would like to have a rollbar made from it. I need the bending and welding capabilities of a competent shop.
Thanks for any all help.
Also, if anyone knows of any chassis builders in the Austin, Texas area, I would appreciate a contact. I have 304 stainless steel pipe in 1.5" and 2.0" available to me and would like to have a rollbar made from it. I need the bending and welding capabilities of a competent shop.
Thanks for any all help.
11-29-01, 10:42 PM
#2
canadian monster
iTrader: (2)
Join Date: Mar 2001
Location: Trois-Rivières, Qc, Can
Posts: 2,083
Likes: 0
Received 0 Likes
on
0 Posts
ask Crispyrx7 or send me an e-mail next monday at bordeleau.alex@hydro.qc.ca
i can give you a couple of pics
puma
i can give you a couple of pics
puma
Thread
Thread Starter
Forum
Replies
Last Post
rx8volks
Canadian Forum
0
09-01-15 10:46 PM