palsor1

iTrader: (2)

Hey guys,

I'm considering running my dual-pump setup with 2 feed lines in parallel as others have done. I would use the stock feed/return lines as feed lines and then use the stock vapor line as a return. I notice after reading that some people have mentioned that they clean the stock vapor line before using it. How would I go about that cleaning without getting gas all over the place? Thoughts?

- Andy

dgeesaman

iTrader: (7)

Idea:

Set it up with an old fuel filter at the end of the return right before it enters the gas tank. Run the fuel pump for a minute or two and then remove/discard the fuel filter.

Dave