2nd turbo not working- any suggestions?
#1
Junior Member
Thread Starter
Join Date: Jun 2001
Location: sunnyvale, Ca. USA
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
2nd turbo not working- any suggestions?
I have a VR 93 FD. I just found out via my turbo boost gauge that my second turbo is not kicking in after the first one engages. I know that the pattern should be close to 10-8-10 but it's like 10-8-4. everything is stock except dp, aluminum ast. I'm checking the vacuum lines but are there any other possibilities? I appreciate all the help. Thanks. Em
#2
don't race, don't need to
#3
Take off your intake stuff and go ahead and change out all the vacuum hoses you can going to the CRV, BOV, CCV... I had a bov hose that was leaking and a crack in another hose... after I changed em... bam - she worked as it should. about 3ft of vacuum hose to bust those out and you can eliminate one of the problems. *use zip ties
#4
Senior Member
Join Date: Mar 2001
Location: Massachusetts
Posts: 724
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2nd turbo not working- any suggestions?
Originally posted by emm21
I have a VR 93 FD. I just found out via my turbo boost gauge that my second turbo is not kicking in after the first one engages. I know that the pattern should be close to 10-8-10 but it's like 10-8-4. everything is stock except dp, aluminum ast. I'm checking the vacuum lines but are there any other possibilities? I appreciate all the help. Thanks. Em
I have a VR 93 FD. I just found out via my turbo boost gauge that my second turbo is not kicking in after the first one engages. I know that the pattern should be close to 10-8-10 but it's like 10-8-4. everything is stock except dp, aluminum ast. I'm checking the vacuum lines but are there any other possibilities? I appreciate all the help. Thanks. Em
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
03-17-22 02:46 PM
Turblown
Vendor Classifieds
0
08-18-15 10:01 PM