Nassin31spr

iTrader: (3)

Ok I have a 94 fd3s, Its been converted to rhd and has no rear chassis harness right now. I have a fuel cell and Im about ready to start the car. I used a relay and hard wired the fuel pump to the ignition just to pressurise the system. Problem is the fuel pump wont stop priming and I hear a whooshing noise coming from below the intake. Was wondering if the pump is controlled by the ecu or if maybe I just have a bad injector o ring. ill be pulling it tomorrow anyways. Just figured Id check and see if anyone else has had this issue. Any input would be greatly appreatiated.