badddrx7

iTrader: (7)

I am pretty good with the wiring of a 3rd gen and have a manual, but I cannot find where the 12v ingition power slot that resides on the fuse block by the clutch pedal, get's it's power from. I want to trace that wire on back to see what all connects to that circuit. Can anyone trace that slot back on the drawing and give me a clue ?

It's probalby the one that everyone uses as a 12ign lead to a gauge or accessory. Yes, that one....

Tom

rotorbrain

joint box=04 = engine 15 amp ,,, goes to the fuel pump , ignition switch ,a condenser and the igniter

badddrx7

iTrader: (7)

Thanks, I see that route thru the 15a engine out to three places, C, M, and N. But I do not see the spade connector anyway along that route. I will try pulling the 15a fuse and see if power still exists at the spade connector next. Maybe they just didn't draw it in there.

Tom