1200 injectors
#1
Retired RX7 mechanic
Thread Starter
Join Date: Feb 2001
Location: Long Island, NY
Posts: 999
Likes: 0
Received 0 Likes
on
0 Posts
1200 injectors
Where can I get 1200 injectors? Ive ben looking everywhere for them.....
If I got he 1300 will I need a different fuel rail? Dont really want to do the fuel rail though...
If I got he 1300 will I need a different fuel rail? Dont really want to do the fuel rail though...
#2
Full Member
iTrader: (1)
Join Date: Mar 2001
Location: Ponce PR
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
To use the OEM fuel rail the injectors must be side feed. Largest side feed injector available in the market is an 850cc. The 1200's and 1300's available are 850cc's that have been "bored-out" to the larger size. I believe RC engineering are the pioneers of this tech upgrade. Check with Jason at the RX-7 Store. He can hook you up.
#3
Lives on the Forum
i have not done it myself, but have been shown by silver7 from this forum how to do the larger 1600's. you just have to bore out he fuelrail. thats all he did. here is a site for cheap injectors. http://www.precisionte.com./
go under buick. you will need to run a resistor inline as these are low imp. i was told by vosko that you need a 10a25w resistor inline. i would test that number before i installed to know for sure. an ecu is not something i want to burn up.
go under buick. you will need to run a resistor inline as these are low imp. i was told by vosko that you need a 10a25w resistor inline. i would test that number before i installed to know for sure. an ecu is not something i want to burn up.
Thread
Thread Starter
Forum
Replies
Last Post
datfast1
Old School and Other Rotary
18
06-20-19 10:53 PM