$2500 Fd
Thread Starter
Junior Member
Joined: Mar 2002
Posts: 22
Likes: 0
From: Birmingham Al
$2500 Fd
Well, guys have been lurking for a few weeks, and really researching, this forum. I have been fortunate enough to buy a high mileage chassis FD for peanuts, A forum sponsor is building the motor. I am a forced induction Miata guy...mainly the twisties, but is a high 13 car....ahhh but always wanted a 7.. and now have one...and am prolly way older than most of you, so be prepared for newbie, DA questions
Welcome to the forum, please give us the details on your car. Here's some sites to check out if you don't know about them already.
http://www.rx7turboturbo.com/robrobinette/
http://www.scuderiaciriani.com/rx7/index.html
http://www.maxcooper.com/rx7/
http://www.iluvmyrx7.com/
http://home.istar.ca/~dvandit/rx7stuff.shtml
vendors:
http://www.rx7.com/
http://www.rx7store.net/
http://www.m2performance.com/
http://www.srmotorsports.com/
http://www.mazdatrix.com/
Good luck with your 7.
http://www.rx7turboturbo.com/robrobinette/
http://www.scuderiaciriani.com/rx7/index.html
http://www.maxcooper.com/rx7/
http://www.iluvmyrx7.com/
http://home.istar.ca/~dvandit/rx7stuff.shtml
vendors:
http://www.rx7.com/
http://www.rx7store.net/
http://www.m2performance.com/
http://www.srmotorsports.com/
http://www.mazdatrix.com/
Good luck with your 7.
Thread Starter
Junior Member
Joined: Mar 2002
Posts: 22
Likes: 0
From: Birmingham Al
It is a 93 Touring Montego...have already sourced needed interior parts from Mazmart in Atlanta. Bryan at BNR is going the motor. Body is straight and is buffing out well. Basically we are building to around 360-380 rwhp
Thread
Thread Starter
Forum
Replies
Last Post
RyanFox
New Member RX-7 Technical
7
Sep 18, 2015 09:09 PM



