Question to those with Re-Amemiya sleek lights
#1
Full Member
Thread Starter
Question to those with Re-Amemiya sleek lights
Hi Guys,
I got a set of Re-Amemiya sleek lights (official) secondhand but with no wiring. Can anyone who has them confirm what should be lit up when.
Each headlight has 2 x light clusters and in each light cluster there are 2 x bulbs.
So when should the light clusters come on eg both main bulbs on when on dipped and then the smaller secondary bulb comes on also when on full beam?
In vids I have only seen both lights on and only one of the clusters.
Any help would be ace.....I know the stock plugs have a ground, full and low beam connector.
Cheers
Gareth
I got a set of Re-Amemiya sleek lights (official) secondhand but with no wiring. Can anyone who has them confirm what should be lit up when.
Each headlight has 2 x light clusters and in each light cluster there are 2 x bulbs.
So when should the light clusters come on eg both main bulbs on when on dipped and then the smaller secondary bulb comes on also when on full beam?
In vids I have only seen both lights on and only one of the clusters.
Any help would be ace.....I know the stock plugs have a ground, full and low beam connector.
Cheers
Gareth
#3
Rotary Freak
iTrader: (15)
There is a way to create your own wiring harness with relays. I believe you will need three relays in order to achieve the configuration you are looking for. I will look later, but try to search the internet. I've seen a few write ups on Jeep/off-roading forums.