Something tells me all this pretty shiny exhausts don't look so nice and shiney anymore....Since i went single my pretty RB duals have the tips BLACK.
|
Originally Posted by KaiFD3S
RB dual tip too, but might trade for N1 duals...
http://img.photobucket.com/albums/v233/KaiFD3S/c.jpg |
Red-Rx7, your car is vicious! It's a damn monster! Good job man!
|
Originally Posted by alberto_mg
trying to repeat the thread in the Advanced Tech forum? https://www.rx7club.com/showthread.p...=exhaust+sound
|
I have the Greddy PE, it sounds good but its too damn big and plus it has melted the lower bumper trim a little bit. I want to buy a new one but i am broke right now....and i still need to get my car tuned........... i will post pics and if your lucky i will post a video!
|
Originally Posted by Red-Rx7
I have a 4" downpipe, lead to a Magnaflow 6" round race muffler (4" inlet, 4" outlet: Click Me) muffler, then a 4" midpipe running to a Magnaflow oval race muffler (4" inlet , 4" outlet: Click Me). The oval race muffler has a standard single-wall 4" exhaust tip.
The sound quality is horrible, but you can get an example here: Click Me and here is an external sound shot of the car on the dyno: Click Me Here is an undershot picture: http://home.comcast.net/~mhaun5/rx7/Exhaust2.jpg and http://home.comcast.net/~mhaun5/rx7/Exhaust.jpg |
I cant get the dyno run to work :(
|
2 Attachment(s)
Racing beat dual tip....
|
i guess i would be representing the hks carbon ti
http://img.photobucket.com/albums/v4...o/DSC01898.jpg http://img.photobucket.com/albums/v4...o/DSC00412.jpg |
dang, i cant get the dyno run of red-rx7 to wrk :(
quite anxious to hear it. :( |
Originally Posted by cloead
It does not fit the car and looks like a cheap generic muffler welded to a pipe that does not fit the car. Worse yet the car is stock, it would be better if you riced it out with some flat black steel front wheels. |
here is mine hks hi-power sound really good not to loud (still have stock cat).
https://www.rx7club.com/attachment.p...id=78591&stc=1 https://www.rx7club.com/attachment.p...id=78592&stc=1 https://www.rx7club.com/attachment.p...id=78059&stc=1 |
here is my Greddy EVO. Is not too loud but it used to drone while crusing. I still got the stock mid pipe but not for long. I also have a HKS dp and running non-seq. Not the best picture either. Nice RHD FD. I always liked the HKS Hi Power series specially the Carbon Ti. I will post another one to see how it sounds with a RX-7 Store resonated MP.
http://www.imagestation.com/picture/...7/f6f47748.jpg |
I fixed the dyno-run link
|
2 Attachment(s)
Originally Posted by ManGaZeRo
i guess i would be representing the hks carbon ti
https://www.rx7club.com/attachment.p...id=95198&stc=1 https://www.rx7club.com/attachment.p...id=95199&stc=1 i have sound bytes if someone is interested, i just dont know hwo to host them mike |
Damn it, Red-Rx7. Now I'm going to have to go with those "mufflers", even though you can barely call them that. But I don't need 4'', so the 3.5'' will suffice. Thanks for the info.
|
1 Attachment(s)
PFS exaust: nice sound loud drone on highway, even with the windows up, A/C on, with cruise control. It always amazes me when all of these things work so well after 12 years, cold a/c!
|
Originally Posted by turbojeff
Hate me or not, that has got to be one of the crappiest lookin' cat-backs available.
It does not fit the car and looks like a cheap generic muffler welded to a pipe that does not fit the car. Worse yet the car is stock, it would be better if you riced it out with some flat black steel front wheels. Looks great to me, sounds great, and looks exactly like any other catback out there that uses a large muffler. But whatever. |
Originally Posted by turbojeff
Hate me or not, that has got to be one of the crappiest lookin' cat-backs available.
It does not fit the car and looks like a cheap generic muffler welded to a pipe that does not fit the car. Worse yet the car is stock, it would be better if you riced it out with some flat black steel front wheels. |
Originally Posted by Barban
http://image34.webshots.com/35/5/63/...1YGBCfd_ph.jpg
homemade, magnaflow round, 3" in 3" out, generic angled 3" chrome tip behind an rx7store RMP its deep and loud. striclty for pirates; no ninjas, autobots, etc. |
nice exhaust's guys
|
Originally Posted by TwinTurbo93
3" SS DP, Custom made MP w/3" Borla Turbo straight-through mufller, Apex-i N1 Dual CB... I love the sound, real deep and throaty...Wouldn't trade it for nothing...
https://www.rx7club.com/attachment.p...chmentid=94600 :peace: |
Originally Posted by jimlab
Yeah... worst sounding exhaust I've ever heard on an FD and it adds extra weight. Bitchin'!
I think the perfect exhaust, since Borla doesn't make a twin tip Stinger cat-back for the FD, is an RB twin tip with twin Borla Stinger tips.
Originally Posted by Jesuscookies
No lie, those Apex'i duals sound absolutely horrendous on a 7.
I have the RB dual tip, and I think it sounds really nice. I would have liked to get it without the Racing Beat etching, as I really do not need any more attention. :p: I love the sound of my N1 Dual, but hey, everyone has a diferent taste... |
Originally Posted by speedx7
awesome exhaust!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
|
Originally Posted by TwinTurbo93
I guess you guys like your FD's to sound like a civic or a corola.
|
All times are GMT -5. The time now is 01:09 PM. |
© 2024 MH Sub I, LLC dba Internet Brands