Need a recommendation for a good reliable shop!!
#1
New to the Club!
Thread Starter
Need a recommendation for a good reliable shop!!
I am in Jersey, and I do not have time to work on the engine myself to be honest. I have the car up in Michigan with Chips Motorsports, but now regretting it. Does anyone have any shop recommendations, preferably on the East coast, but I am seriously willing to go anywhere for it. I have a mostly stock '93 FD RX7. I need an engine rebuild. LMK if you can help!!
The following 2 users liked this post by Sgtblue:
HopX7 (10-01-23),
KaitlynFrey (09-29-23)
#3
Full Member
iTrader: (4)
I would also recommend Banzai Racing. I haven't dealt with Chris directly for an engine rebuild, but my friends have.
However, my first FD the motor was actually built by Chris at Banzai 2 owners prior to my ownership. Some 8 years later I bring the car (and motor obviously) to Banzai and Chris is able to clean up the fuel map and make corrections knowing how the car was tuned some 8 years prior in a different chassis.
However, my first FD the motor was actually built by Chris at Banzai 2 owners prior to my ownership. Some 8 years later I bring the car (and motor obviously) to Banzai and Chris is able to clean up the fuel map and make corrections knowing how the car was tuned some 8 years prior in a different chassis.
The following users liked this post:
KaitlynFrey (09-29-23)
The following users liked this post:
KaitlynFrey (10-01-23)
#5
rotary amuse
iTrader: (12)
For a true rotary builder Ihor Huk at IR Performance in New Jersey is one of the best rotary builders in the country
Set expectations on timing, and you won't be disappointed once it's Renna tuned and delivered
Plus 1 more for Chris at Banzai. Haven't worked with him on mechanicals, but every interaction I have had with him over the decades has been great
Set expectations on timing, and you won't be disappointed once it's Renna tuned and delivered
Plus 1 more for Chris at Banzai. Haven't worked with him on mechanicals, but every interaction I have had with him over the decades has been great
Last edited by ZumSpeedRX-7; 10-01-23 at 10:21 AM.
The following users liked this post:
KaitlynFrey (10-01-23)
#6
Facilitator of Disorder
iTrader: (4)
Join Date: Dec 2020
Location: Allentown PA/ Three Mile Island
Posts: 277
Received 152 Likes
on
96 Posts
Chris from Banzai is the real deal. Very thorough in what he does. Have been very impressed after seeing the work he did on a friend's 3 rotor. I will likely be sending my engine there when the time comes.
Communication is good too. A couple years ago, I bought some parts that were backordered and the first thing he did was contact me to inform of the backordered status and whether I wanted to proceed w/ the transaction.
Hope the above information is of some value. Good luck in your search!
Communication is good too. A couple years ago, I bought some parts that were backordered and the first thing he did was contact me to inform of the backordered status and whether I wanted to proceed w/ the transaction.
Hope the above information is of some value. Good luck in your search!
The following users liked this post:
KaitlynFrey (10-01-23)
The following users liked this post:
KaitlynFrey (10-03-23)
Trending Topics
#8
Built Not Bought
iTrader: (14)
Originally Posted by ZumSpeedRX-7
For a true rotary builder Ihor Huk at IR Performance in New Jersey is one of the best rotary builders in the country
Set expectations on timing, and you won't be disappointed once it's Renna tuned and delivered
Plus 1 more for Chris at Banzai. Haven't worked with him on mechanicals, but every interaction I have had with him over the decades has been great
Set expectations on timing, and you won't be disappointed once it's Renna tuned and delivered
Plus 1 more for Chris at Banzai. Haven't worked with him on mechanicals, but every interaction I have had with him over the decades has been great
There is also someone on here that had to go get their car back from chips after multiple years to have another shop finish it....
The following 2 users liked this post by TwinCharged RX7:
KaitlynFrey (10-03-23),
spintowinrx7 (12-18-23)
Thread
Thread Starter
Forum
Replies
Last Post