anyone installed the launch control kit " wot box" from n2mb?




N2MB Racing




"WOT Box
The WOT Box adds two major features to any car. They are No-lift shifting and 2-step launch control. Both of these features are completely user-programmable using the WOT Box Graphical User Interface.
The No-Lift Shift feature makes no-lift shifting easy by cutting your engine's ignition for a very short period while you no-lift shift. No-lift shifting is keeping the gas down through the shifft. The ignition cut allows the synchros in your transmission to mesh easily, reducing the chance of missing a gear and damaging your transmission. Keeping your foot down through the shift also allows you to hold boost through the shift, thereby significantly improving your E.T.

The major benefits are:
Lower ETs
Reduced chance of missing a gear
More consistent, effortless shifts
Reduced wear on the transmission
Reduced chance of major transmission damage
The 2-Step Launch Control modulates the ignition by cutting power to individual ignition coils to hold the RPM you want to launch at. The turbo will spool up while you do this. You can use this feature for a more consistent and more powerful launch in boost"

 

I don't see the RX7 listed as compatible

 

I have contacted them it is compatible!

"
Yes, the WOT Box wiring is universal and can be used on any car with fuel injection. We have had several customers successfully install the WOT Box on the '86, '89 and '93 RX7s."

 

anyone?

 

What factory sensor does it uses to trigger spark cut when shifter beggins?

 

"To summarize the functions of the wires:
RED - Ignition coil power IN
ORANGE - Ignition coil power OUT
BLACK - Ground
GREEN - Clutch wire input
BLUE - Throttle position sensor or accelerator pedal position sensor input
YELLOW - RPM input"

 

OK thanks