Decided to install A/C utilizing RX-8 A/C components
Thread Starter
Full Member
Joined: Jan 2018
Posts: 157
Likes: 63
From: Maryland
Decided to install A/C utilizing RX-8 A/C components
This is the first episode of the series... I'll be installing the Air Conditioning system back to my Mazda RX-7 but utilizing RX-8 A/C components. I'm also utilizing the opportunity to mod, fix and re-paint other stuff that was killing me. The engine bay is one of the things I haven't touch since I bought the car so why not.
On this specific video I'll be replacing the heator core and cleaning the evaporator. The video provides useful info on the process and how to identify the system your FD currently has. Special thanks to Jason from JP3 Motorsports.
https://youtu.be/081zJr4nqwk
On this specific video I'll be replacing the heator core and cleaning the evaporator. The video provides useful info on the process and how to identify the system your FD currently has. Special thanks to Jason from JP3 Motorsports.
https://youtu.be/081zJr4nqwk
JP3 has a few parts / products to facilitate that install if you didn't know.
Here's an example of one: https://jp3motorsports.com/collectio...r12-evaporator
They have a few options so check the rest of their products.
Good luck
Here's an example of one: https://jp3motorsports.com/collectio...r12-evaporator
They have a few options so check the rest of their products.
Good luck
Thread Starter
Full Member
Joined: Jan 2018
Posts: 157
Likes: 63
From: Maryland
JP3 has a few parts / products to facilitate that install if you didn't know.
Here's an example of one: https://jp3motorsports.com/collectio...r12-evaporator
They have a few options so check the rest of their products.
Good luck
Here's an example of one: https://jp3motorsports.com/collectio...r12-evaporator
They have a few options so check the rest of their products.
Good luck
Thread
Thread Starter
Forum
Replies
Last Post
RoTaRyBoYz
Rotary Drag Racing
21
May 5, 2009 09:48 PM