Y pipe always pop out!! Where I can get a Efini Y Pipe??
Thread Starter
Rotary Enthusiast
Joined: Jun 2001
Posts: 815
Likes: 0
From: Mont-Laurier , quebec
Y pipe always pop out!! Where I can get a Efini Y Pipe??
Greetings all,
The ******* coupler on the Y pipe always come to leak and I loose tremendous amount of boost . I tight the coupler but it always
leak after a while.
Where can I get a Efini Y Pipe??
Thanks!
Serge
The ******* coupler on the Y pipe always come to leak and I loose tremendous amount of boost . I tight the coupler but it always
leak after a while.
Where can I get a Efini Y Pipe??
Thanks!
Serge
well, we haven't heard from you for a while serge, how are you?
i think that jason at rx7 store sells one
have you try to buy a new coupler?
Personnaly, if i were you, i would get rid of that piece and have some custom piping done for the intercooler, that should get the problem solved. You are lucky, with your ecu, you can get rid of the air pump and remove the cat, i can't
puma
i think that jason at rx7 store sells one
have you try to buy a new coupler?
Personnaly, if i were you, i would get rid of that piece and have some custom piping done for the intercooler, that should get the problem solved. You are lucky, with your ecu, you can get rid of the air pump and remove the cat, i can't
puma
Thread Starter
Rotary Enthusiast
Joined: Jun 2001
Posts: 815
Likes: 0
From: Mont-Laurier , quebec
hey!
Hey Puma
Ya I am fine and you. I found a brand new silicone coupler at
the truck shop and it solved the problem.
However I plan a serious piping upgrade this winter
to solve this problem forever.
1-Efini Y pipe
2-G Reddy interc hard pipe with sil coupler.
3-M2 Inlet polished hard pipe.
And a Pettit resonated Midpipe...I don't have enough
top end. Once the the mid pipe installed I will have
more boost and more boost= more boost leak.
So I need to upgrade my piping.
Damm!! Cost me a fortune!
When these mods will be done I will sit on my ***
and relax for a while...
Serge
Ya I am fine and you. I found a brand new silicone coupler at
the truck shop and it solved the problem.
However I plan a serious piping upgrade this winter
to solve this problem forever.
1-Efini Y pipe
2-G Reddy interc hard pipe with sil coupler.
3-M2 Inlet polished hard pipe.
And a Pettit resonated Midpipe...I don't have enough
top end. Once the the mid pipe installed I will have
more boost and more boost= more boost leak.
So I need to upgrade my piping.
Damm!! Cost me a fortune!
When these mods will be done I will sit on my ***
and relax for a while...
Serge
Originally posted by puma
well, we haven't heard from you for a while serge, how are you?
i think that jason at rx7 store sells one
have you try to buy a new coupler?
Personnaly, if i were you, i would get rid of that piece and have some custom piping done for the intercooler, that should get the problem solved. You are lucky, with your ecu, you can get rid of the air pump and remove the cat, i can't
puma
well, we haven't heard from you for a while serge, how are you?
i think that jason at rx7 store sells one
have you try to buy a new coupler?
Personnaly, if i were you, i would get rid of that piece and have some custom piping done for the intercooler, that should get the problem solved. You are lucky, with your ecu, you can get rid of the air pump and remove the cat, i can't
puma
