Post Some Pics of your FD! :D <- Pics of your car go in this thread!!
Be a Hero...Punch a Koala
Join Date: Aug 2005
Location: Evansville, IN
Posts: 1,022
Likes: 0
Received 0 Likes
on
0 Posts
F yo couch!
iTrader: (6)
Join Date: Feb 2007
Location: Belleville, NJ
Posts: 2,321
Likes: 0
Received 0 Likes
on
0 Posts
well i plan on flaring the fenders out to their limits in the rear, and a mild roll in the front.
i like the offset the wheels have, pretty aggressive. i still have to decide a good tire size for when i get coilovers..
currently i have on 275/40 in the rears, and the front i got some 245/40.
i like the offset the wheels have, pretty aggressive. i still have to decide a good tire size for when i get coilovers..
currently i have on 275/40 in the rears, and the front i got some 245/40.
Make an assessment...
iTrader: (3)
Damn you, you beat me to it HAHA. Well, so have alot of other people it seems.
Here are some pics I took the other day before I started reassembling the car after paint and body work. That's a long story in itself.
Oh and the other FD belongs to my roommate, rotorbizle on this forum. We did his engine swap this weekend (Et3rNaL's previous engine haha).
Rotary Freak
iTrader: (19)
well i plan on flaring the fenders out to their limits in the rear, and a mild roll in the front.
i like the offset the wheels have, pretty aggressive. i still have to decide a good tire size for when i get coilovers..
currently i have on 275/40 in the rears, and the front i got some 245/40.
heres some pics i took today.
i like the offset the wheels have, pretty aggressive. i still have to decide a good tire size for when i get coilovers..
currently i have on 275/40 in the rears, and the front i got some 245/40.
heres some pics i took today.
Here are some pics of my setup, 17x10 +22 235/40 and 18x10+38 265/35 (waiting for my friend to drop off the 15mm spacers, I may need more or may need less). Tires are Falken 452's. PLEASE don;t mind the dust and the tape, I just spent the day sanding for fitmenr of the KS auto kit...It has been washed since then.
zerorx7 hope you can see the fender, tire, and wheel in this pic, but this is at my ride height
I do not have current pics, but I had to raise 3/8" to get some need ground clearance. With the KS Auto kit I now have across the bumper 3" left, 2.5" center and 3" right, which it was much lower as seen in the pics. I based my height requirements off my IS300, as it scrapes at a number of places I go in and out of, and the lip height is 3.5" , and the overhang is less than an RX7.
I did not measure the stock bumper w/r1 lip clearance, but I would guess it was at least 3-3.5" across.
I will post up some new pics once I take them, and I will put the stock bumper w/r1 lip on and take some measurements.
Given my current front wheel fitment, maybe looking for something large in diameter for cleance and a nice tuck; my wheels with tires (brand new) are silently up forsale!
I hope this helps!!
And my Lexus:
Space cadet
iTrader: (78)
I am not sure what your wheel offset is in the rear, looks like a 17x10 +18 with a drop, roll and some camber they should tuck nicely!! The fronts are pretty much perfect, but again drop that ****!! On the tire sizes I would recommend a 235/40 and a 265/35 as the max. I have a picture of the fitment in the front.
Here are some pics of my setup, 17x10 +22 235/40 and 18x10+38 265/35 (waiting for my friend to drop off the 15mm spacers, I may need more or may need less). Tires are Falken 452's. PLEASE don;t mind the dust and the tape, I just spent the day sanding for fitmenr of the KS auto kit...It has been washed since then.
zerorx7 hope you can see the fender, tire, and wheel in this pic, but this is at my ride height
I do not have current pics, but I had to raise 3/8" to get some need ground clearance. With the KS Auto kit I now have across the bumper 3" left, 2.5" center and 3" right, which it was much lower as seen in the pics. I based my height requirements off my IS300, as it scrapes at a number of places I go in and out of, and the lip height is 3.5" , and the overhang is less than an RX7.
I did not measure the stock bumper w/r1 lip clearance, but I would guess it was at least 3-3.5" across.
I will post up some new pics once I take them, and I will put the stock bumper w/r1 lip on and take some measurements.
Given my current front wheel fitment, maybe looking for something large in diameter for cleance and a nice tuck; my wheels with tires (brand new) are silently up forsale!
I hope this helps!!
Here are some pics of my setup, 17x10 +22 235/40 and 18x10+38 265/35 (waiting for my friend to drop off the 15mm spacers, I may need more or may need less). Tires are Falken 452's. PLEASE don;t mind the dust and the tape, I just spent the day sanding for fitmenr of the KS auto kit...It has been washed since then.
zerorx7 hope you can see the fender, tire, and wheel in this pic, but this is at my ride height
I do not have current pics, but I had to raise 3/8" to get some need ground clearance. With the KS Auto kit I now have across the bumper 3" left, 2.5" center and 3" right, which it was much lower as seen in the pics. I based my height requirements off my IS300, as it scrapes at a number of places I go in and out of, and the lip height is 3.5" , and the overhang is less than an RX7.
I did not measure the stock bumper w/r1 lip clearance, but I would guess it was at least 3-3.5" across.
I will post up some new pics once I take them, and I will put the stock bumper w/r1 lip on and take some measurements.
Given my current front wheel fitment, maybe looking for something large in diameter for cleance and a nice tuck; my wheels with tires (brand new) are silently up forsale!
I hope this helps!!
yea right now the rear is 17x10 +18 offest 275/40.
i was actually considering doing this 235/40 and a 265/35 just like you said.
i have yet to drop in my motor, and get coilovers.
but i do plan on getting my fenders rolled by next week.
right now currently i jsut plan on putting back my 93 oem front bumper and R1 lip for the time being.
i was really happy with the offest of the wheels because i was aiming for a real aggressive look. and seeing from your pictures, since your running a similar set up. it was a great choice.
i appriciate the help
Rotary Freak
iTrader: (19)
yea right now the rear is 17x10 +18 offest 275/40.
i was actually considering doing this 235/40 and a 265/35 just like you said.
i have yet to drop in my motor, and get coilovers.
but i do plan on getting my fenders rolled by next week.
right now currently i jsut plan on putting back my 93 oem front bumper and R1 lip for the time being.
i was really happy with the offest of the wheels because i was aiming for a real aggressive look. and seeing from your pictures, since your running a similar set up. it was a great choice.
i appriciate the help
i was actually considering doing this 235/40 and a 265/35 just like you said.
i have yet to drop in my motor, and get coilovers.
but i do plan on getting my fenders rolled by next week.
right now currently i jsut plan on putting back my 93 oem front bumper and R1 lip for the time being.
i was really happy with the offest of the wheels because i was aiming for a real aggressive look. and seeing from your pictures, since your running a similar set up. it was a great choice.
i appriciate the help
I will have to slap the oem w/r1 lip back on and give you some clearance numbers.
deal with it
iTrader: (10)
Join Date: Jun 2008
Location: California
Posts: 694
Likes: 0
Received 0 Likes
on
0 Posts