Post Some Pics of your FD! :D <- Pics of your car go in this thread!!
#9505
Imported From Japan
iTrader: (1)
Join Date: May 2008
Location: Austin
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
it might be that light only if it was hollow and thinly layered. Carbon runs aat 4.8 oz. per sq yrd. Seems like the only way to make that thing that light would be to run one layer of fiber just for cosmetic look and underneath a thin layer or cathair or glassweave just to brace and keep the fiber from cracking under slight pressure. Dose this sounds reasonable?
#9507
Hey Buddy,
2 meanings
OUT29
OUT = Out, 2 = to, 9 = night = OUT TONIGHT
OUT = Out, 2 = to, 9 = 9 as in 9000RPM = "revs"OUT TO 9 :p
Or are you talking about
I LOVE HATERS?
Thanks for the comments guys
here are some more.. my car is a photo ****
2 meanings
OUT29
OUT = Out, 2 = to, 9 = night = OUT TONIGHT
OUT = Out, 2 = to, 9 = 9 as in 9000RPM = "revs"OUT TO 9 :p
Or are you talking about
I LOVE HATERS?
Thanks for the comments guys
here are some more.. my car is a photo ****
#9508
Full Member
Join Date: May 2008
Location: Granada-Spain
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
[QUOTE=koguchi power;8395410]Hey Buddy,
2 meanings
OUT29
OUT = Out, 2 = to, 9 = night = OUT TONIGHT
OUT = Out, 2 = to, 9 = 9 as in 9000RPM = "revs"OUT TO 9 :p
Or are you talking about
I LOVE HATERS?
Very good, very good word's play
2 meanings
OUT29
OUT = Out, 2 = to, 9 = night = OUT TONIGHT
OUT = Out, 2 = to, 9 = 9 as in 9000RPM = "revs"OUT TO 9 :p
Or are you talking about
I LOVE HATERS?
Very good, very good word's play
#9512
Lives on the Forum
iTrader: (4)
found the sides... man those are nice.
https://www.rx7club.com/shineautoproject-161/fd3s-sanai-works-type-aero-kit-available-505800/page9/
https://www.rx7club.com/shineautoproject-161/fd3s-sanai-works-type-aero-kit-available-505800/page9/
#9514
Imported From Japan
iTrader: (1)
Join Date: May 2008
Location: Austin
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
koguchi whats the offset and specs on those rims? I like the stance.
guys do you know if a 18 x 9.5 on a +35 offset will clear? I know it needs to be a +38 idealy but the only rims I can find that i want come in a +35
guys do you know if a 18 x 9.5 on a +35 offset will clear? I know it needs to be a +38 idealy but the only rims I can find that i want come in a +35
#9523
RE Amemiya FD3S
Join Date: Aug 2007
Location: Australia
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
a 9.5 +35 will clear the guards, however, you will need to check the disk type to see if it clears the front caliper, and also suspension clearance... coilovers generally give you a bit more room to play with...
#9524
Imported From Japan
iTrader: (1)
Join Date: May 2008
Location: Austin
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Apexi, Im on tein coilovers and sitting on 17x10rear and 17x9 front. Wanting to go to 18's but just needing a bit of guidance as far as widths and offsets to be alright and no rubbing=P
heres some updated pics with the new shine parts added as well as hood, tails, headlights ect. almost done!
heres some updated pics with the new shine parts added as well as hood, tails, headlights ect. almost done!
Last edited by Akira Kuramoto; 07-21-08 at 11:31 PM.