Help!have real bad problems with 93
08-22-01, 11:59 PM
#1
Passenger
Posts: n/a
Help!have real bad problems with 93
I gotta bad problem with my 93.This is how it is.
for the last few days everytime i cold start the motor it is okay for about 15 seconds then grey smoke starts pouring out the exhaust, and smoke seems to be escaping from the turbo section of the engine bay.After 5 minutes or so the smoke goes away but the car is sometimes slow and sometimes it is fast as normal.i dont really have any idea what it is except maybe the turbos or the engine.Any input would be greatly appreciated
Thanks
for the last few days everytime i cold start the motor it is okay for about 15 seconds then grey smoke starts pouring out the exhaust, and smoke seems to be escaping from the turbo section of the engine bay.After 5 minutes or so the smoke goes away but the car is sometimes slow and sometimes it is fast as normal.i dont really have any idea what it is except maybe the turbos or the engine.Any input would be greatly appreciated
Thanks
08-23-01, 04:43 AM
#2
Junior Member
Join Date: Aug 2001
Location: cali
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
I have the same problem...sorry to tell you this buddy but from what you posted to me it sounds like a bad water seal...are you going through coolant or overheating..? you said grey smoke which could mean burning oil which is normal to a degree but it shouldn't be a LOT of smoke...light grey or white smoke is a sign of your car burning coolant and that means a rebuild...don't worry cuz i'm about to have to go through one myself...
08-23-01, 12:29 PM
#3
Junior Member
Join Date: Mar 2001
Location: Gloucester, Va, USA
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
As long as you're not running hot, you should be ok for a little while. Right now you probably just need to tear the motor down and replace the seals and gaskets. If you let it overheat, you'll be replacing housings and your rebuild will be twice as expensive. Also, don't let the car sit for an extended period of time. With the water/coolant getting into the combustion chamber, there is a possibility of getting chrome flaking on the rotor housings, which (depending on the severity) can ruin them. I would do the rebuild as soon as you possibly can before you do any more damage to the motor. This would be a good time to do some porting and upgrade the apex seals, etc. Sorry for the bad news.
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM