Yet another FC -> FD rims question
#1
infini guru
Thread Starter
Join Date: Nov 2001
Location: Sunnyvale, CA
Posts: 1,183
Likes: 0
Received 0 Likes
on
0 Posts
Yet another FC -> FD rims question
Ok, searching this subject is pretty difficult because most people refer to them as "FD" and "FC" rims and you can't search anything less than 3 characters in length... Sooooo, if this has been covered before, I'm sorry, yada yada yada, not my fault. =P
I'm aware this is possible, but there are some things I'd like to clear up:
1) I know(I think) that I need to run 25mm offset in the front, but what about the back to get the rear tires to match? The same?
2) And more importantly, where can I buy the spacers? H&R obviously doesn't make them for the RX-7, do they make something for another car that will fit the RX-7? Protege or something?
I am not looking to replace my lugs with longer ones, so any old spacer isn't going to do, I need the ones that fit over the stock lugs with their own set of bolts for the rim. Tons of thanks in advance guys, I appreciate it.
Steve
P.S. For future searching purposes:
FD3S FC3s 2nd gen 3rd gen rims wheels stock
I'm aware this is possible, but there are some things I'd like to clear up:
1) I know(I think) that I need to run 25mm offset in the front, but what about the back to get the rear tires to match? The same?
2) And more importantly, where can I buy the spacers? H&R obviously doesn't make them for the RX-7, do they make something for another car that will fit the RX-7? Protege or something?
I am not looking to replace my lugs with longer ones, so any old spacer isn't going to do, I need the ones that fit over the stock lugs with their own set of bolts for the rim. Tons of thanks in advance guys, I appreciate it.
Steve
P.S. For future searching purposes:
FD3S FC3s 2nd gen 3rd gen rims wheels stock
Thread
Thread Starter
Forum
Replies
Last Post
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM