ok here's the problem guys and girls.........i grounded my ECU just fine today and then i grounded the boost sensor(brown wire with white stripe) i ran the boost sensor ground from the wire to the bracket that holds the factory air box down just to the left of the boost sensor>>>>>>>>>>then i tried to start the CAR AND it would just keep cranking and not turning over!!!!!>>so then i un plugged the boost sensor ground from the bracket and it fired right up????/ WTF is up?????? did I run the ground to the right place or what???? I need some help bad!!!!!!!!


Please Help if you know how to do this the right way!!!!!!!!!!!!!!!!!!!!!!


Thanks
Josh

 

WRONG WIRE. Should be the brown wire with a black stripe.