would you use this housing?
#1
Senior Member
Thread Starter
Hi!
I need some advice.
I have 2 very good housings i meant to use but theire sparkplug holes do not match.
And now i found this housing from the garage. Its evenly worn like this, but i cant feel it with a fingernail.
So is it okay to use it, maybe put it in for a rear chamber?
The engine is gonna be a 6 port turbo and about 350-500hp
I need some advice.
I have 2 very good housings i meant to use but theire sparkplug holes do not match.
And now i found this housing from the garage. Its evenly worn like this, but i cant feel it with a fingernail.
So is it okay to use it, maybe put it in for a rear chamber?
The engine is gonna be a 6 port turbo and about 350-500hp
Trending Topics
#8
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
just to be sure,I hope you are actually going to use 2 housings that have the spark plug holes in the same places.(2 s4 housings or 2 s5 housings).Not using two different housings on the build.
#9
Senior Member
Thread Starter
Thread
Thread Starter
Forum
Replies
Last Post