Wiring Injectors
Thread Starter
Joined: Jan 2003
Posts: 1,331
Likes: 0
From: Chino Hills, Cali
Wiring Injectors
Has anyone ever wired there primarys strait to the ECU bypassing the harness? Im lookin for the diagram if anyone has it on what wires are what and where they go can only find a general picture.
Lives on the Forum
Joined: Feb 2004
Posts: 5,721
Likes: 3
From: Coldspring TX
IF it's the high-impedance setup from 87 1/2 on, here goes:
1) the front primary light green wire goes to the ECU, pin 3E
2) the rear primary light green/blue wire goes to the ECU, pin 3C
3) the black/yellow wires to both come from the power circuit (main relay)
4) the ECU (probably) uses the ground on the rear rotor housing, which come from pins 2R, 3A, and 3G, for the injectors
That help?
1) the front primary light green wire goes to the ECU, pin 3E
2) the rear primary light green/blue wire goes to the ECU, pin 3C
3) the black/yellow wires to both come from the power circuit (main relay)
4) the ECU (probably) uses the ground on the rear rotor housing, which come from pins 2R, 3A, and 3G, for the injectors
That help?
Thread
Thread Starter
Forum
Replies
Last Post