s3x3s

might be getting an s-4 that needs a new wiring harness, wonding about how much that will run me. any help is appreciated
( s-4 N A )
thnx s3x3s

Icemark

New you are looking around $1500 for an engine harness

I have an used S4 N/A engine harness for a 86-87.5 if you want to make me an offer

s3x3s

scoring one from a junkyard for 125. *score*

chris_stampe

not really, you could get one from someone off here for probably $50 Lots of people have them left over from TII swaps.

silverrotor

iTrader: (1)

Wiring Harness? There Is 2 of them In the Engine Bay that are classified as the Front Engine Harness and the Engine Harness.

The Front Engine Harness Is 25lbs of wires, grounds and Plugs. 2 plugs are feed to the ECU. From there, It goes up the Firewall. Across the Firewall. Through the Driverside Firewall hole. Along the Left Inner Fender, across to the Right Fender and ends at the Right Shock Tower.

The Engine Harness has 1 plug from the ECU. It goes through the Passengerside Firewall hole, right down to the Right Shock Tower but prior to that, a branch of the Harness turns ever so abruptly, towards the Engine.

You could go to www.mazdasurplus.com and see If they have It In stock, as was the case for me. I gladly paid $180 plus shipping for my Brand New OEM Front Engine Harness, as opposed to $2700 can from the Dealership. Or, surprisingly enough, www.ebay.com Is selling various Harnesses for FC's. If he doesn't have It In stock, email him. And besure to match It to your VIN# or you will have gone from bad to worse when Installed.