Wiring guide?
Guess 15 would help:
https://www.rotaryheads.com/PDF/2nd_gen/
https://www.rotaryheads.com/PDF/2nd_gen/
Joined: Mar 2001
Posts: 31,833
Likes: 3,232
From: https://www2.mazda.com/en/100th/
i like to start where the main harness comes through the firewall on the drivers side and work my way around.
that harness comes down the inner fender and then sits on top of the frame rail before going up to the front where it is attached to the round bar.
i would actually start by cleaning everything, and touching up any paint that needs it.
Mazda likes to tie the harness down with lots of zip tie things, and the harness will have spots where these zip tie things are supposed to go. the one in the pic is that white band on the harness, its telling you to secure it there.
the engine harness goes on the engine, separate thing
that harness comes down the inner fender and then sits on top of the frame rail before going up to the front where it is attached to the round bar.
i would actually start by cleaning everything, and touching up any paint that needs it.
Mazda likes to tie the harness down with lots of zip tie things, and the harness will have spots where these zip tie things are supposed to go. the one in the pic is that white band on the harness, its telling you to secure it there.
the engine harness goes on the engine, separate thing
Thread
Thread Starter
Forum
Replies
Last Post
nd_track_driver94
2nd Generation Specific (1986-1992)
1
Dec 2, 2009 05:40 PM
rimarx@
Australia and New Zealand Forum
3
Apr 28, 2005 02:41 AM