turbo-polak

my lt-10 is 90% done being wired in...

but now in my never-ending quest to have a nice clean engine bay, i want to cut out as much of the drivers side harness as possible....

i can see what looks like a bunch of relays of some sort......some for the headlights obviously.... and some for... well... my friend said they were for the fuel system?? is this right? ( im talking about all of the little sealed boxes right by the brake booster)

i realize that if i want my headlight motors to work, and lights to turn on, i'll need to keep a lot of the wiring in there...

so what exactly can i cut out?

thanks in advance... i hope i made my question clear enough

cheers,Dan.

NZConvertible

Look in the FSM wiring diagrams, specifically the harness diagrams at the back. Find out what each component is before ripping it out or cutting wires.

turbo-polak

Fsm?

DerangedHermit

Ok, if you don't know which wires to take out, and what the FSM is, I probably wouldn't take them out myself, unless it's necessary. I'm assuming you just want to take them out to make things easier/less cluttered.

RotaryEvolution

iTrader: (30)

better off removing the relays first and taping up the connectors in case you remove something you may need.

NZConvertible

The FSM is the factory service manual.

Please don't tell me you're trying to do with without the wiring diagrams for your car...

turbo-polak

nono. sorry. i just didnt know the abbreviation for it...