wires
#1
Senior Member
Thread Starter
Join Date: Apr 2002
Location: Duluth, MN
Posts: 419
Likes: 0
Received 0 Likes
on
0 Posts
wires
I dont have any pictures right now but I will try to describe it the best that I can and get pictures up in a few days.
There are 2 wires I am not exactly sure where or what they are. After I took my throttle body off, I noticed there was a wire with a connected just sitting under it. I dont know if I yanked it off some how taking the throttle body off or if it was off this whole time. It was cut from the wire and everything so it was just a piece of wire with a connecter. It is a single wire that is "black/red." I am assuming it connects somewhere right under there where the wiring harness is. I couldnt find where it was though. Any Ideas?
Also there is a bigger "brown" split wire...not connect or nothing just free wire, that comes out right about the same spot as the wires that go right next to where you could fill ur radiator fluid up on top of the waterpump. It is also next to two wires that connects to the bigger device(forget the name) that is next to the BAC valve. At first i thought it was the broken end of the wire I found, But its different colors and size. I am thinking maybe the stock air intake somewhere? Since this one was removed. Never seen the stock airintake so not sure if there was one.
Anyways thats about all I can give for details. If you can help me out that would be awesome. thanks
There are 2 wires I am not exactly sure where or what they are. After I took my throttle body off, I noticed there was a wire with a connected just sitting under it. I dont know if I yanked it off some how taking the throttle body off or if it was off this whole time. It was cut from the wire and everything so it was just a piece of wire with a connecter. It is a single wire that is "black/red." I am assuming it connects somewhere right under there where the wiring harness is. I couldnt find where it was though. Any Ideas?
Also there is a bigger "brown" split wire...not connect or nothing just free wire, that comes out right about the same spot as the wires that go right next to where you could fill ur radiator fluid up on top of the waterpump. It is also next to two wires that connects to the bigger device(forget the name) that is next to the BAC valve. At first i thought it was the broken end of the wire I found, But its different colors and size. I am thinking maybe the stock air intake somewhere? Since this one was removed. Never seen the stock airintake so not sure if there was one.
Anyways thats about all I can give for details. If you can help me out that would be awesome. thanks
#4
Senior Member
Thread Starter
Join Date: Apr 2002
Location: Duluth, MN
Posts: 419
Likes: 0
Received 0 Likes
on
0 Posts
looking at the FSM right now...much better then the haynes for the wiring thats for sure heh. I think I should figure it out with this...if not I will let yeah know
#5
Senior Member
Thread Starter
Join Date: Apr 2002
Location: Duluth, MN
Posts: 419
Likes: 0
Received 0 Likes
on
0 Posts
ok I lied...I dont really care for the FSM...didnt help...I couldnt see the pictures well.
Does anyone have a diagram that goes by colors by any chance? That would be much easier I would think
Does anyone have a diagram that goes by colors by any chance? That would be much easier I would think
Thread
Thread Starter
Forum
Replies
Last Post
toplessFC3Sman
2nd Generation Specific (1986-1992)
6
03-20-18 01:54 PM