wire through firewall
#1
Junior Member
Thread Starter
Join Date: Jan 2003
Location: Santa Cruz, CA
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
wire through firewall
I have a 1987 turbo, i want to run 0 guage wire (fairly large) from battery to trunk area... Without spending hours looking for a place to run it...do any of you guys know of an opening where a wire that large can be run? Or will i have to pull out the drill???
#3
SOLD THE RX-7!
Join Date: Mar 2001
Location: Vancouver, BC, Canada
Posts: 7,451
Likes: 0
Received 0 Likes
on
0 Posts
umm... I Don't think so.
the biggest hole will be where the speedo or thottle go through on the driver side.
actully if you don't have AC there will be a big one on the pass side but that's kinda a long trip from the battery..
the biggest hole will be where the speedo or thottle go through on the driver side.
actully if you don't have AC there will be a big one on the pass side but that's kinda a long trip from the battery..
#4
Rotary Enthusiast
Join Date: Dec 2002
Location: Darwin, NT, Australia
Posts: 1,228
Likes: 0
Received 0 Likes
on
0 Posts
Just pull out the drill, I did this just yesterday, I found a comvienient spot for me was just below the A/C evaporator box slightly to the left of the drain hole for it.
This worked great on my RHD Rx, i'm unsure of the layout of your LHD engine bay's though, so it might not work for you.
This worked great on my RHD Rx, i'm unsure of the layout of your LHD engine bay's though, so it might not work for you.
#5
Keep Right Except to Pass
What's the outside diameter of the stuff you're using. I had no trouble feeding a 3/8" OD vacuum line in through the one for the front engine harness on the left. I won't cut my sheetmetal, but that's just me and I'm not normal.
Thread
Thread Starter
Forum
Replies
Last Post