which wire in cluster powers parking lights?
#1
I am 2Furious
Thread Starter
Join Date: Sep 2004
Location: NJ / Philly
Posts: 846
Likes: 0
Received 0 Likes
on
0 Posts
which wire in cluster powers parking lights?
Stuck in some ebay indiglo gauges. And they don't work. They I reread their directions and they say to use the "power source which is connected to your parking lights". Been looking at the FSM diagrams, but still can't figure out which wire it is. So anyone know which line will give me the power I need?
#2
Former Moderator. RIP Icemark.
Powered by the white/green going into the headlight switch.
If you meant outputs from the headlight switch:
Dimmered controlled dash lights: Red/Green
Non dimmer/parking lights: red/black
If you meant outputs from the headlight switch:
Dimmered controlled dash lights: Red/Green
Non dimmer/parking lights: red/black
#3
I am 2Furious
Thread Starter
Join Date: Sep 2004
Location: NJ / Philly
Posts: 846
Likes: 0
Received 0 Likes
on
0 Posts
i'm kind of suspicious of colors. Could you give a plug location with that please? Output from the headlight switch non-dimmer.
Last edited by gingenhagen; 06-11-05 at 12:58 AM.
#5
putting it down daily
I wonder if someone is color blind and needs a diagram of the pinout...
And you absolutely do NOT want to hook up the EBay indiglos transformer power to a dimmed wire off the switch- this is BAD. The kit comes with its own dimmer to be wired in between the transformer & indiglos. ALWAYS use a non dimmed lead.
And you absolutely do NOT want to hook up the EBay indiglos transformer power to a dimmed wire off the switch- this is BAD. The kit comes with its own dimmer to be wired in between the transformer & indiglos. ALWAYS use a non dimmed lead.
Last edited by introVert; 06-11-05 at 04:18 AM.
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
03-17-22 02:46 PM