http://cgi.ebay.com/ebaymotors/18-x-...9298QQtcZphoto

Im seriously loving these wheels. They'r Rota Torque-R's in Full Royal Sports Bronze.

Rota Torque-R Specs:

Wheel Diameter (Inches): 18"
Wheel Width (Inches): 9.5"
PCD Bolt Pattern: 5x114.3
Offset: 28mm
Hub Bore: 67.1
Color: Full Royal Sports Bronze

Will they work?


OR I like these as well...

http://cgi.ebay.com/ebaymotors/Rota-...7941QQtcZphoto

P45F Specs (Front):

Wheel Diameter (Inches): 18"
Wheel Width (Inches): 8.5"
PCD Bolt Pattern: 5x114.3
Offset: 25mm
Hub Bore: 73
Color: Black w/ Red Lip


P45R Specs (Rear):

Wheel Diameter (Inches): 18"
Wheel Width (Inches): 9.5"
PCD Bolt Pattern: 5x114.3
Offset: 30mm
Hub Bore: 73
Color: Black w/ Red Lip

 

8.5s will barely fit in front and you'll have to run 225s unles you do fender rolling widebody or coilovers.

 

The P45 option looks like it'll barely fit, but everything looks good, like bolt patterns and offsets. I was going off this table: http://howto.globalvicinity.com/gv_w...i=56&co=1&vi=1

edit: TehMonkey, that page says anything above 225 is for use in the rear unless front fenders are rolled - is that accurate?

 

Yeah reTed posted somewhere the biggest sizes and offsets you can use on an fc in the wheel and tire section of the site. 225 is biggest in the front, 255 in the back, front offset for that is 27 and 25 is close, I think the rear offset was 18 for the 255s. Again though rolling fenders, wider fenders and coilovers help fitting bigger tires, people have fit 235s up front just from using coil overs beause there is more space.