they are 16x8 bbs wheels (8Jx16H2 466 ET50) this would have an offset of +50mm, right?

these are the same size as the FD wheels, right? soo what do I need to make them fit?

 

Don't know for sure, but if they are exactly like the FD rims, then do a search for FD rims on FC. If I remember correctly, you will need spacers up front, but I think they'll fit in back w/o. Of course then you have fronts that stick out more -- so if you're going for the low-rider look, you'll be fine. You may want to put both on spacers for consistency -- but then you may have clearance problems. Sorry, not much help here other than search for FD rims on FC thread(s).

 

Ya those are the same as FD rims if they are 16x8 with a +50 offset. You need spacers up front but not in back. There are quite a few posts about this.

 

yeah, but I can't search for FD, or FC, because they're only 2 letters. I thought about it already

 

3rd gen wheels that works or can you use numbers

 

https://www.rx7club.com/forum/showth...3rd+gen+wheels