Will this rear end fit???
#1
Full Member
Thread Starter
Join Date: Nov 2006
Location: NC
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Will this rear end fit???
I am looking to upgrade my rear end to a Torsen LSD, the one I found is for a 89-91 Rx-7 I have a '87. There is currently no LSD in the differential. I think that the regular clutch type will fit all 2nd gens but not sure. IF anyone knows let me know
#2
Are you experienced?
iTrader: (18)
Who makes the Torsen? It depends what application they built it for, it will vary for n/a or turbo diff. Contact the manufacturer is your best bet.
http://mazdatrix.com/G8LSD.HTM
http://mazdatrix.com/G8LSD.HTM
#3
Full Member
Thread Starter
Join Date: Nov 2006
Location: NC
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Who makes the Torsen? It depends what application they built it for, it will vary for n/a or turbo diff. Contact the manufacturer is your best bet.
http://mazdatrix.com/G8LSD.HTM
http://mazdatrix.com/G8LSD.HTM
http://cgi.ebay.com/ebaymotors/ws/eB...ht_3981wt_1212
looks like a 31-spline unit. I thought that the 86-91 Rx-7 had the same rear end design just small differences like the flange, lsd type, and ratios. I was thinking the parts were interchangeable
#5
This sh*t burns oil!
iTrader: (7)
here is the link
http://cgi.ebay.com/ebaymotors/ws/eB...ht_3981wt_1212
looks like a 31-spline unit. I thought that the 86-91 Rx-7 had the same rear end design just small differences like the flange, lsd type, and ratios. I was thinking the parts were interchangeable
http://cgi.ebay.com/ebaymotors/ws/eB...ht_3981wt_1212
looks like a 31-spline unit. I thought that the 86-91 Rx-7 had the same rear end design just small differences like the flange, lsd type, and ratios. I was thinking the parts were interchangeable
#6
Back in the game
iTrader: (-1)
If you want a torsen get one out of a miata if you're NA.
FYI GSL-SE, all 2nd gen NA and 7" miata rear ends interchange (just the diff unit not the pumpkin). Well, I'm not sure about the 2005+ miatas but all NA/NB aside from the 1.6l 6" diffs will swap over.
Don't forget to have the gear lash set when you swap everything over.
FYI GSL-SE, all 2nd gen NA and 7" miata rear ends interchange (just the diff unit not the pumpkin). Well, I'm not sure about the 2005+ miatas but all NA/NB aside from the 1.6l 6" diffs will swap over.
Don't forget to have the gear lash set when you swap everything over.
Trending Topics
#9
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,841
Received 2,604 Likes
on
1,847 Posts
FYI GSL-SE, all 2nd gen NA and 7" miata rear ends interchange (just the diff unit not the pumpkin). Well, I'm not sure about the 2005+ miatas but all NA/NB aside from the 1.6l 6" diffs will swap over.
Don't forget to have the gear lash set when you swap everything over.
Don't forget to have the gear lash set when you swap everything over.
the 71-83 diffs use a smaller axle, and the 90-93 miata is a 6" ring gear or something.
the 2006+ miata is weird, its not an FD/t2/rx8 and its not an 84-2005 NA.....
Thread
Thread Starter
Forum
Replies
Last Post