will I be ok ?
#1
Junior Member
Thread Starter
iTrader: (5)
Join Date: Sep 2011
Location: lawrence kansas
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
will I be ok ?
I was looking to run 17x8 *28 , on 235/45/17 with tein lowering springs , anyone run a similar setup ? Will I need spacers , or will I rub at all ? What do you guys think
#2
Top Down, Boost Up
iTrader: (7)
With lowering and that tire width, the front will almost definitely hit the fender unless it is rolled/pulled. There will be a lot of inside clearance. The rears should be just fine.
I have 17x8 +30 with 215/45/17s up front, and the tire edge is almost perfectly parallel to the outside of the fender. But it's also at stock ride-height.
I have 17x8 +30 with 215/45/17s up front, and the tire edge is almost perfectly parallel to the outside of the fender. But it's also at stock ride-height.
Last edited by RotaryRocket88; 01-31-13 at 12:57 PM. Reason: Correction: offset on mine is +30 not +35.