why do ppl remove their ftp lens? (searched)
#1
Senior Member
Thread Starter
Join Date: Aug 2005
Location: San Francisco
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts
why do ppl remove their ftp lens? (searched)
im sure this has been covered before but i tried searching and couldnt find anything.
so why do i see so many fc with their ftp removed. whats the benefits/purpose?
so why do i see so many fc with their ftp removed. whats the benefits/purpose?
#4
everything will be okay
iTrader: (15)
Join Date: Oct 2005
Location: Cedar Rapids, IA
Posts: 1,650
Likes: 0
Received 0 Likes
on
0 Posts
most (almost all of them) the studs in the back are broken.
alot of people (including myself) pull them to repaint their car. some people never put them back in because either they are faded, cracked, filled with water, or the studs are broken.
btw, aluminum polish works amazing at restoring the lenses if they are faded.
alot of people (including myself) pull them to repaint their car. some people never put them back in because either they are faded, cracked, filled with water, or the studs are broken.
btw, aluminum polish works amazing at restoring the lenses if they are faded.
Trending Topics
#10
my friend was drunk and fell and smashed his stupid looking drunk Russian face into my ftp lens........ when he fell everyone was "omg" and ran to him while i went "MY CAR!" and ran to my car, he was ok. he didn't feel anything nor remembers what happend
#11
sideways!!
iTrader: (9)
the back part where the stud mounts on the plastic broke on my original ones. i eventually found a set and put them on. i dont know why some people say it looks better without them.
btw when they are faded you can buff them and they look like new. it only takes about 1 minute of buffing on each one.
btw when they are faded you can buff them and they look like new. it only takes about 1 minute of buffing on each one.
#15
http://www.mazdatrix.com/n-1a.htm
they go for about $90 a piece
I just removed mine over the weekend to polish them up and sure enough the studs broke in the back of one...so I'll probably leave them out till I feel like buying new ones.
they go for about $90 a piece
I just removed mine over the weekend to polish them up and sure enough the studs broke in the back of one...so I'll probably leave them out till I feel like buying new ones.
#16
Rotary Apprentice
Join Date: Oct 2006
Location: Spartanburg area, SC
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
Noob question, what is an FTP lens? I didn't see it in the list of abbreviations in the FAQ.
Edit: Is it Flash To Pass lens? The clear one in the front?
Edit: Is it Flash To Pass lens? The clear one in the front?
#18
Rotary Apprentice
Join Date: Oct 2006
Location: Spartanburg area, SC
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
#23
Beast Mode
iTrader: (8)
Join Date: Mar 2002
Location: USA!
Posts: 820
Likes: 0
Received 0 Likes
on
0 Posts
I bought mine new from the dealer 2 years ago and from day one they still fogged up. I tried to take them out about 3 months ago and one of the damn studs broke just like every other set and they are only 2 years old!!! Crap I tell you just crap!!
I ended up fixed it though because it looks gay without them so we're all good again!
I ended up fixed it though because it looks gay without them so we're all good again!
#25
Full Member
Join Date: Nov 2006
Location: Seaside, CA
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
Mine were faded and filled with condensation so I decided to take them out and clean them up but the studs broke. I've been meaning to buy new ones; just another part on the wtb list...