Where's this hose go?
06-29-05, 06:33 PM
#1
Two Fitty +
Thread Starter
iTrader: (2)
Join Date: Jun 2005
Location: Springfield, IL
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
Where's this hose go?
I think this hose got disconnected when I had the oil changed a while back. Just noticed it the other day while installing a new AC compressor. I traced the other end back to the charcoal canister. For the life of me, I cannot see where the other end goes. must be under the cluster of solenoid valves, but I can't see it.
06-29-05, 07:35 PM
#5
Two Fitty +
Thread Starter
iTrader: (2)
Join Date: Jun 2005
Location: Springfield, IL
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
Hmmm. There's a connector on the back of the filler neck that is already connected to a hose going to the purge control valve (which matches the diagram in my handy dandy Haynes manual). According to the diagram, it shows the hose coming from the canister connecting in the same vicinity. Is there a connector underneath the other one? The diagram kind of shows my mystery hose connecting to the engine block below the filler neck. Sound right? I just can't seem to see it or feel it. Or are there two connections on the filler neck?
06-29-05, 09:28 PM
#6
Two Fitty +
Thread Starter
iTrader: (2)
Join Date: Jun 2005
Location: Springfield, IL
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
Found it
Found it. It was on the block back behind the filler neck. The guy must have really had to work at "accidentally" pulling it out. he must have snagged it with the oil filter wrench or something.