liquidferrum

its the thing behind the turbo that opens that twin scroll switch thing in the exhaust manifold, it was late and i turned it too hard (not thinking) and it snapped, i called dealership and they have no clue what i am talking about, does anyone know where i can get this screw or can anyone send it to me if i pay them a meager sum

thanks
liquidferrum

Snrub

iTrader: (1)

I had the same problem... I drove for a few days with hit hanging there and I ended up having a shop deal with it. They put studs in.

liquidferrum

i mean the bolt that goes through the vaccum line that goes into the actuator, the bolt that is hollow down the middle, i need that one

RETed

Try and contact either hypntyz7 or Paul Ko @ K2RD http://www.k2rd.com/



-Ted

Slacker7

iTrader: (2)

That's a banjo bolt right? you could try your local hardware store/autozone or if you prefer online go to www.summitracing.com search for banjo bolts...

liquidferrum

that is just what i am looking for, thanks alot man

HAILERS

Look here http://www.mazdaformance.com/rx7parts.htm

for the part number to give to the dealer.

liquidferrum

would anyone happen to know the pitch of it, i assume that it is a 8 mm or maybe even 6mm, and it looks like a 1.25 pitch, but i would rather not have to eyeball it

HAILERS

At the above site you'll find that the part number is 9938-00-400 for the bolt and 9956-20-800 for the washer that goes under it. Look at the section for the 88 called ENGINE. Page 1-D4 This site: http://www.mazdaformance.com/rx7parts.htm

liquidferrum

or that works, thanks