Wheel studs
#1
Junior Member
Thread Starter
Join Date: Jan 2008
Location: Valley Mills, Tx
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Wheel studs
Ok all the electrical problems are fixed for now now i need to how or if you can replace the wheel studs on my 90 rx7 or do i have to buy new hubs
#2
Lives on the Forum
Hammer them out then press in some new ones. In the rear you need to take the hub off if you want longer studs than stock. In front take the hubs off anyway, no sense in beating up the bearings.
#4
Pistons are gay
iTrader: (11)
Join Date: Dec 2006
Location: Prince George, BC
Posts: 1,973
Likes: 0
Received 0 Likes
on
0 Posts
Just to make sure you don't **** it up, I would just go to a brake shop. They should be able to do it for fairly cheap. If you don't put the studs in properly and you've never done it before I wouldn't risk it cause thats basically risking your life.