I have a question on wheel studs I have motegi rims and my stock wheel studs are to short. There is just a little stub sticking out. I what some long wheel studs some that stick out far. I have open end muteki lug nuts I want A wheel stud that sticks out from the lug nut. I was looking at these wheel studs that I found on here that some one was talking about. Should these be long enough http://www.summitracing.com/parts/AR...5&autoview=sku

 

What? Are you a ****** ricer or something? That **** looks retarded. Why would you want to do that? So you can grind them off before you crub your rimzzz?

 

bam! ownage!! bahahah

 

Welcome to teh rx7 club

 

Never mind the dipsh#tz that are volunteering to prove their ignorance in public.

You don't have to worry about having enough threat length with those studs. As suggested by incubuseva they're actually slightly too long. Unfortunately, I've never found 2.0-2.25" studs, which would fit much better.

 

It is going to be a drift car and I don't want the wheels to fall off. I want to know that my lug nut is on.

 

I just changed my wheel studs this week. I used ARP 100-7708 for the rear and 100-7713 for the front. The fronts are 3.5" long and come right out to the edge of my wheels. I am running 17x8.5 +25 offset all around. I could have went with the 7708 all around though.