2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Wheel bearings or suspension....PLEASE HELP!!!!

Thread Tools
 
Search this Thread
 
Old Dec 14, 2001 | 02:11 AM
  #1  
NevadaLoneWolf's Avatar
Thread Starter
Full Member
Tenured Member 10 Years
 
Joined: Sep 2001
Posts: 231
Likes: 0
From: Lost Wages, NV
Exclamation Wheel bearings or suspension....PLEASE HELP!!!!

I can grab the top of my front wheels and physically shake them. ALSO, when i hit about 70-80mph(designated cruising spd on the Parkway)....sometimes even LOWER speeds than that, i feel the steering wheel vibrate a little. It never did this before. Please help me out people!!!!

BTW....It goes away at HIGH speeds....unless it's shaking so fast I can't feel it
Reply
Old Dec 14, 2001 | 02:36 AM
  #2  
HAILERS's Avatar
HAILERS
Tenured Member 10 Years
 
Joined: May 2001
Posts: 20,563
Likes: 27
From: FORT WORTH, TEXAS,USA
If you grab the top of the tire with one hand and the bottom with the other and alternately pull with one and shove with the other, there should not be any slop in the wheel bearings. If you do, replace them. Cars a gittin a little old. In fact if its not too costly, you might replace your lower ball joints while your at it. They're fairly easy to replace but cost about fifty bucks. Mazdatrix has a FAQ on how to replace the front wheel bearings. The ball joints are self evident.
Reply
Old Dec 14, 2001 | 11:40 AM
  #3  
NevadaLoneWolf's Avatar
Thread Starter
Full Member
Tenured Member 10 Years
 
Joined: Sep 2001
Posts: 231
Likes: 0
From: Lost Wages, NV
Thanks alot....I work at an auto parts store, so I'll just get the bearings and lower ball joints from there....I only go to the dealer for parts I need from them....
Reply
Old Dec 14, 2001 | 11:46 AM
  #4  
Xentrix's Avatar
Kill Bear
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 106
Likes: 0
From: Asheville, NC
They wheel bearings just might be loose, regrease them and see if that helps. They naturally get loose over time, and it takes maybe 20 minutes if you've got all the stuff. There is a how to on www.fc3s.org
Reply
Old Dec 14, 2001 | 01:52 PM
  #5  
HAILERS's Avatar
HAILERS
Tenured Member 10 Years
 
Joined: May 2001
Posts: 20,563
Likes: 27
From: FORT WORTH, TEXAS,USA
XENTRIX is right of course. Maybe I should have mentioned that, maybe not.
Reply
Old Dec 15, 2001 | 12:52 AM
  #6  
NevadaLoneWolf's Avatar
Thread Starter
Full Member
Tenured Member 10 Years
 
Joined: Sep 2001
Posts: 231
Likes: 0
From: Lost Wages, NV
Thanks alot people
Reply




All times are GMT -5. The time now is 05:29 PM.