2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Wheel bearing?

Thread Tools
 
Search this Thread
 
Old Aug 15, 2005 | 11:38 AM
  #1  
powrdby13B's Avatar
Thread Starter
i'll blow YOUR valve off
Tenured Member 05 Years
 
Joined: May 2004
Posts: 1,064
Likes: 0
From: KC MF MO
Wheel bearing?

Okay, so I got this fancy new rx7... and when i drive it i noticed that if i'm braking or just letting the gears slowing down (not speeding up or going one speed) it rides kinda rough and theres this sound coming from the back of the car that sounds like something hitting once each time the back drivers side wheel goes around. If I shift hard, this noise is particularly loud and it sounds as if the whole car is going to fly apart. It also feels like something slipping, especially when i scratch second gear and the tires barely slip. Only thing i can think of is a wheel bearing or maybe the LSD is about to fly apart... Any thoughts?
(88 GTU or GXL.. has a little of both )
Reply
Old Aug 15, 2005 | 12:30 PM
  #2  
Syonyk's Avatar
Rotary Freak
Tenured Member 05 Years
 
Joined: Jun 2004
Posts: 2,718
Likes: 1
From: Ames, IA
It could be the rear differential mounts having broken, and what you're hearing is the differential bouncing around. The loud noise on a shift would tend to support this theory.

-=Russ=-
Reply
Old Aug 15, 2005 | 12:32 PM
  #3  
KompressorLOgic's Avatar
I
Tenured Member: 20 Years
iTrader: (6)
 
Joined: May 2004
Posts: 3,755
Likes: 12
From: Spanaway, WA
do you hear a boom noise when you shift? like a bang like somthigns hitting??

sounds like you might have a bad rear diff mount... when it brekas it will alow the front of the diff to move up and smack the underside of the car. its either that or maybe one of hte u joints on your driveline is bad.. but its most likly the rear diff mount....

doesnt sound like wheel bearings to me.... if it was oyur wheel bearings it would be making metalic noise all the time.....
Reply
Old Aug 15, 2005 | 01:04 PM
  #4  
powrdby13B's Avatar
Thread Starter
i'll blow YOUR valve off
Tenured Member 05 Years
 
Joined: May 2004
Posts: 1,064
Likes: 0
From: KC MF MO
thanks guys.. i gotta work in two hours but i'll look if it's cooled down before then
Reply




All times are GMT -5. The time now is 05:48 AM.