What's this next to the ECU ?
1 Attachment(s)
ok, Im ready to pull the engine out, needs to unplug the ECU connector and I found this ...
https://www.rx7club.com/attachment.p...1&d=1301013287 ECU wrap in food wrap ... I was like *hmm, well done?* no bracket, nothing, its bascially just "hang" there the whole time, Im surprised the pointy solder points didn't punch a hole thru the food wrap & create a short and fried the whole ECU ... the reason is that one of the previous owner installed some whack ass Viper alarm to the car, wires were sliced and soldered into the harness, I cut all those bullshit alarm wires and going to rip the whole system later. (I will install a "real" alarm to the car later myself, at least I know I won't just slice shit up like this) Question as follows : 1. The ECU has no sticker on it, nothing. Why is that? I assume that means this is a "reman" ECU from some company ? My car is a 91 S5 NA, so I assume this is a N350 ECU (No sticker, plus this car originally came from California) Is there any way to tell which ECU is this? again, it has no sticker on it. 2. Will a N351 ECU work ? 3. on some picture I saw a box on the left of the ECU? can anybody tell me what's that ? http://www.rotaryresurrection.com/2n...a/image011.jpg 4. I supposed to remove a "plate" to be able to access to the ECU. But I don't see no "plate", I just lift the carpet and I saw the ECU just hanging there. so I guess this "plate" is missing with the ECU bracket, I found the ECU bracket part number but its NLA from Mazda, Anybody know the "plate" part number or where is it locate in the FSM ? What's that? as mine is "missing" ? Thx a bunch |
The plate is missing. It's there so the passengers feet dont' rest agains the ECU. The plate covers the ECU when in use.
I think the 351 is for a turbo car and you should not use it on a n/a. I'll let others answer your other questions. EDIT: I was wrong. N370 is for turbo. The 351 should work on your non turbo series five car. |
the ECU should be bolted down on the top and bottom not "hanging" there.
even though it cant hang cause the plugs are on the bottom of the ECU when i lifted my carpet to check some readings at the ECU pins it was sitting next to another ECU that was bolted down like its supposed to I cant read the tag but it almost looks factory (im probably wrong) |
1 Attachment(s)
Originally Posted by HAILERS2
(Post 10534693)
The plate is missing. It's there so the passengers feet dont' rest agains the ECU. The plate covers the ECU when in use.
Cuz what you guys see is what the ECU was the whole time ---- its just there with no cover and no bracket. EDIT: I was wrong. N370 is for turbo. The 351 should work on your non turbo series five car. https://www.rx7club.com/attachment.p...7&d=1301019889 I pulled the ECU out and its in my room right now. See? no label whatsoever :( Like I said earlier, I can only "assume" that this is a Reman ECU from Cardone. That's also the reason why it has no Mazda label. and I can only "assume" this is a N351 ECU.
Originally Posted by datz
(Post 10534734)
the ECU should be bolted down on the top and bottom not "hanging" there.
even though it cant hang cause the plugs are on the bottom of the ECU After seeing this I want to know what brand of food wrap is that ---- even the pointy solder joints can't break it, must be some really good food wrap. :lol: Anyway, I need to find the bracket, probably need to buy a ECU just for that reason. and the "plate" to let people rest their feet on ... |
the box next to the ecu in your other pic (i believe is an s4 btw) should be the anti-theft module.
|
1 Attachment(s)
Originally Posted by Rx7Ridah
(Post 10534767)
the box next to the ecu in your other pic (i believe is an s4 btw) should be the anti-theft module.
So does that mean S5 don't have it? or one of the "previous" owner took it away to install this PoS Viper garbage alarm ? the closest one I can find is this https://www.rx7club.com/attachment.p...1&d=1301020851 Is it in here? the 67-780 ? |
Isn't that small rectangular box an ABS brake control?
Also don't buy the kickplate/cover new from mazda. There are plenty of people parting out and there is one in every FC. |
On an s4 the Anti-theft module is a little gold box up and behind the glove box. Also for an s4 the ABS module is in the back driver side of the car....
but s5? dunno... |
Originally Posted by texFCturboII
(Post 10534827)
On an s4 the Anti-theft module is a little gold box up and behind the glove box. Also for an s4 the ABS module is in the back driver side of the car....
but s5? dunno... and I dunno if that's Anti-Thief or whatever ... its just not there.
Originally Posted by JustJeff
(Post 10534798)
Isn't that small rectangular box an ABS brake control?
Also don't buy the kickplate/cover new from mazda. There are plenty of people parting out and there is one in every FC. Can anybody show me what the "kick plate" looks like ? |
Wait that box is a knock control module on turbos
|
Originally Posted by JustJeff
(Post 10534877)
Wait that box is a knock control module on turbos
hmm, nobody knows what the "plate" part number is ? hmmm .... |
^ don't buy a plate from Mazda!! They are on every FC and I bet you someone who has parted out a few has them lying around. I believe they are referred to as kickplates...but am not sure.
|
1 Attachment(s)
maybe in here? its in the Floor mats section ?
https://www.rx7club.com/attachment.p...1&d=1301025410 I never seen the plate before so I can't tell. anybody ? |
Originally Posted by JustJeff
(Post 10534951)
^ don't buy a plate from Mazda!! They are on every FC and I bet you someone who has parted out a few has them lying around. I believe they are referred to as kickplates...but am not sure.
I just wanna know the part number. |
|
Just have no idea the protector plate's part number. Can't seem to find it anywhere. |
1 Attachment(s)
ECU Bracket
N326-18-885A (w/o airbag) N387-18-885A (w/ airbag) (Edit: looks like you have this, but the brackets on the ECU itself are missing) The thing labled 69-910A in your last pic is the ECU cover plate. This is the official name and PN: Support, Foot FB01-69-697A And the box next to the ECU in that pic may be a mouse belt controller. There's no knock box on S5s; it's integrated into the N370 ECU. https://www.rx7club.com/attachment.p...1&d=1301029464 |
I'm confused why the part # is important if you're not buying the part...but each to their own.
From that part page I'd guess that #69-901A on the bottom of the page in the center is it Yay....I was right, too bad Rotaryrocket88 beat me to the punch :P |
Originally Posted by RotaryRocket88
(Post 10535058)
ECU Bracket
N326-18-885A (w/o airbag) N387-18-885A (w/ airbag) The thing labled 69-910A in your last pic is the ECU cover plate. This is the official name and PN: Support, Foot FB01-69-697A And the box next to the ECU in that pic may be a mouse belt controller. https://www.rx7club.com/attachment.p...1&d=1301029464 and believe it or not, I just found the plate, same as the one you said. but the price ... I was like WOW ok they must be freaking nuts. As for the bracket, its NLA from Mazda. so I have to find a used set. it be great if you have a set + the plate to sell :) Thx for the info ! |
Originally Posted by JustJeff
(Post 10535062)
I'm confused why the part # is important if you're not buying the part...but each to their own.
From that part page I'd guess that #69-901A on the bottom of the page in the center is it Yay....I was right, too bad Rotaryrocket88 beat me to the punch :P Its the 69-910A. Mazda must be nuts to try to sell it at that price ... |
Originally Posted by JustJeff
(Post 10535062)
Yay....I was right, too bad Rotaryrocket88 beat me to the punch :P
Originally Posted by nycgps
(Post 10535066)
Mazda must be nuts to try to sell it at that price ...
|
Originally Posted by RotaryRocket88
(Post 10535071)
:beard:
What's the price, and where did you look it up? if its like 20-30 bux. sure I just get it, not 134 bux dude. hahahaa I rather just wait for a part out or try to fab a bracket/cover plate myself. |
What's MMS site?
And yeah, I'd get a used one for $5 instead. |
Originally Posted by RotaryRocket88
(Post 10535079)
What's MMS site?
And yeah, I'd get a used one for $5 instead. no way in hell I would buy that plate for 134 bux. brackets are NLA, so I have to find them from a part out. Im in that program cuz I've been doing some race with my rx8. I might turn the FC into another AutoX car, but before that I need to at least make it work (it has shit load of problems) |
|
All times are GMT -5. The time now is 12:52 PM. |
© 2024 MH Sub I, LLC dba Internet Brands